Your browser is out of date.

You are currently using Internet Explorer 7/8/9, which is not supported by our site. For the best experience, please use one of the latest browsers.

View Quote (0)
Login
DEI1028-SES-G

DEI1028-SES-G

The DEI1028 is a control circuit for a 28VDC power bus voltage clamp. It is designed for use as the front end to a 28VDC input power supply to provide transient voltage protection. It controls the gate drive of a P-Channel power MOSFET to linearly clamp the output during over-voltage transients. The output voltage is maintained below the clamping threshold of 35V (max) which is adequate to protect most Commercial-Off-The-Shelf switching supplies, linear regulators, and op amps.


Add to Quote Data Sheet

Features

  • Protection for power electronics on 28VDC avionics or industrial power bus to DO-160, Category Z, Abnormal Surge Voltage (DC) levels.
  • Controls power P-FET to clamp transient at 34V.
  • Small foot print (8L SOIC NB).
  • Wide input voltage range.
  • Programmable Undervoltage Lockout.
  • Logic compatible On/Off input.
  • Stable over temperature.
  • Soft start delay.

Attributes

temp range: -55°C - 85°C
product package type: 8 SOIC NB G
burn in:
channels: 1
lightning protection:
Years to EOL: 10
package description: 8 Pin Plastic SOIC - .150 Body
package type: Surface Mount
JEDEC: MS-012-AA
RoHS:
Product Status: Active
PCN Links:CN-MW-01028-01-A.pdfCN-MW-01028-02-A.pdfCN-MW-01028-03-C.pdfCN-MW-10068-01-B.pdfCN-MW-01028-04-A.pdf

Functional Description: The DEI1028 is a control circuit for a 28VDC power bus voltage clamp. It is designed for use as the front end to a 28VDC input power supply to provide transient voltage protection. It controls the gate drive of a P-Channel power MOSFET to linearly clamp the output during over-voltage transients. The output voltage is maintained below the clamping threshold of 35V (max) which is adequate to protect most Commercial-Off-The-Shelf switching supplies, linear regulators, and op amps. There is an Undervoltage Lockout feature that shuts the Power MOSFET off when the input voltage is below a user programmed threshold. An open collector logic output annunciates the under-voltage status. There is also a logic on/off input which may be used to control the power circuit. An external capacitor may be used to set a delay from when input power is applied to when the MOSFET is turned on.

Get in Touch