Your browser is out of date.

You are currently using Internet Explorer 7/8/9, which is not supported by our site. For the best experience, please use one of the latest browsers.

View Quote (0)
Login

DEI1016-MES

The DEI1016 provides an interface between a standard avionics type serial digital data bus and a 16-bit-wide digital data bus. The interface circuit consists of a single channel transmitter with an 8X32 bit buffer, two independent receive channels, and a host programmable control register to select operating options. The two receiver channels operate identically, each providing a direct electrical interface to an ARINC data bus.


Features

  • Two Receivers and One Transmitter
  • Industry Standard Pin for Pin Replacement Part
  • Wraparound Self-Test mode
  • Word length can be configured for 25 bit or 32 bits operation
  • Parity Status and generation of Receive and Transmit Words
  • 8 Word Transmitter buffer
  • Low Power CMOS
  • Supports multiple ARINC protocols: 429, 571, 575, 706
  • Available in extended (-55/+85°) and Military (-55/+125°) temperature ranges
  • Available in QFP, PLCC, LCC and CDIP packages

Attributes

temp range: -55 to 125
product package type: 44 8X8 I MLPQ G
burn in:
channels: 2
power supply range: 5
lightning protection:
holt x-ref: HI-3282
ddc x-ref pn: DD-03282DC-100
tri state outputs:
fused outputs:
ABD0100:
package description: 44 Pin 8 x 8 Micro Lead Frame Package - Quad
package type: Through Hole
package pic: 44L MLPQ.png
ds version link: DEI1016Pkg.jpg
jedec: DS-MW-01016-01
RoHS: MO-220C
product status:
Replacement PN: Discontinued

The DEI1016 provides an interface between a standard avionics type serial digital data bus and a 16-bit-wide digital data bus. The interface circuit consists of a single channel transmitter with an 8X32 bit buffer, two independent receive channels, and a host programmable control register to select operating options. The two receiver channels operate identically, each providing a direct electrical interface to an ARINC data bus.

The transmitter circuit contains an 8 word by 32 bit buffer memory and control logic which allows the host to write a block of data into the transmitter. The block of data is transmitted automatically by enabling the transmitter with no further attention by the host computer. Data is transmitted in TTL format on the D0(A)/D0(B) output pins. The signal format is compatible with DEI

Get in Touch