Description

Design Flow

Product Matrix

Prototyping

Packaging

Tools/ Downloads

Documentation

FAQs

700 Series Product Matrix:

The 700 Series Bipolar Analog Arrays consists of nine arrays with varying resources. A spreadsheet is available to size an array. This circuit sizer is provided to estimate the array size that a circuit will use. The actual circuit can usually be much smaller since opamps can be replaced by gain stages and bias circuits may be shared. Please read the FAQ on Using Differential Gain Stages in Place of Opamps.

Chip Series	710	711	712	713	723	724	734	736	747
Pads	4	8	17	22	25	30	30	41	48
NPN/PNP Transistors*	14	22	27	39	60	80	120	180	280
Schottky NPN Transistors	4	6	10	11	12	16	24	36	56
Large NPN Transistors	1	1	1	2	3	4	9	5	9
Large PNP Transistors	0	1	1	2	3	3	6	4	5
Total Transistors	33	52	66	93	143	183	279	405	630
750 Ohm Resistors	120	190	210	411	635	895	1268	1735	2439
Total Base Resistance (Ohms)	90k	142k	160k	310k	475k	675k	950k	1.3M	1.8M
Base Pinch Resistors	2	2	9	9	7	11	8	14	16
Epi Pinch Resistors	1	1	2	2	2	2	2	2	2
Junction Capacitors	1	2	2	4	7	7	9	12	10
Cross Unders	40	60	70	160	200	300	450	650	950

*Small NPN and PNP devices share a common structure. These transistor islands can be routed as either device and are marked in the layout to identify them for running Layout Versus Schematic (LVS) checking.